Get a Quote

Contact Us

Blog

Latest News

 

Nulla porttitor accumsan tincidunt. Quisque velit nisi, pretium ut lacinia in, elementum id enim. Quisque velit nisi, pretium ut lacinia in, elementum id enim.

Dahlstrom Cut-Off Presses

Dahlstrom Cut-Off Presses

Jul 2, 2020 |

Dahlstrom Cut-Off Presses can cut formed sections to required lengths in a flying die operation, so the roll forming machine never stops. This compact underslung design delivers the tonnage needed with the benefit of a small foot print.

Dahlstrom offers 4-post mechanical presses in punching and cutoff configurations from 4 tons to 80 tons. Each press is under-driven with an air clutch and brake that is electrically controlled for repeat and non-repeat single­ stroke operation. For flying dies and stationary applications (up to 80 tons), a Four-Post style press may provide the versatility and tonnage you need now and in the future.

Dahlstrom Four-Post Mechanical Presses

Dahlstrom Four-Post Mechanical Presses

Jul 2, 2020 |

Dahlstrom mechanical presses are a versatile, robust option for roll forming and flexible fabrication applications. Notch presses can pierce, notch, emboss or add other engineered features to the product, either before (pre-notch) or after (post-notch) the roll former, however the application may require. Cutoff presses can cut formed sections to required lengths in a flying die operation, so the roll forming machine never stops.

Dahlstrom offers 4-post mechanical presses in punching and cutoff configurations from 4 tons to 80 tons. Each press is under-driven with an air clutch and brake that is electrically controlled for repeat and non-repeat single­ stroke operation. For flying dies and stationary applications (up to 80 tons), a Four-Post style press may provide the versatility and tonnage you need now and in the future.

Dahlstrom Hydraulic Presses

Dahlstrom Hydraulic Presses

Jul 2, 2020 |

Dahlstrom Hydraulic Presses offer the flexibility of standard 4-post configuration or custom designs: flying press frames for special notching applications or self­-contained with a cutoff die, depending on what the application requires.

FEATURES

  • Welded Steel Construction
  • Crankshaft, Pull rods, Wrist pins made from High Strength Alloy Steel
  • Air Friction Clutch and Spring set Brake
  • High Speed Flywheel minimizes die travel and increases production
  • Vertical and Horizontal Adjustment
Dahlstrom Special Presses

Dahlstrom Special Presses

Jul 2, 2020 |

Dahlstrom Special Presses offer the flexibility of standard 4-post configuration or custom designs —  flying press frames for special notching applications or self­-contained with a cutoff die — to meet the requirements of the application.

Hill Engineering Automated Tube Piercing Machinery

Hill Engineering Automated Tube Piercing Machinery

Jul 3, 2020 | , ,

Hill Engineering Automated Tube Piercing Machinery includes the following features:

  • Produces spacer tubes for fuel cells
  • .304″ th. Stainless, .515″ od X .011″ wall
  • Four rectangular slots pierced in each tube
  • Every tube is burr free, clean and non-distorted
  • Air driven cam-pierce design piercing two slots per stroke
  • Special tooling was designed to accept a family of different size parts
  • System produces 400 finished pieces per hour
Hill Engineering HHP Series Standard Hydraulic Presses

Hill Engineering HHP Series Standard Hydraulic Presses

Jul 3, 2020 | ,

Hydraulic Flying Die systems, designed and manufactured by Hill Engineering, provide exceptional accuracy and offer you greater flexibility for system design. We manufacture both “Unitized” self-contained die/press hydraulic units, as well as flying hydraulic presses. Our ability to design and build roll forming die systems using the latest high speed hydraulic technology and electronic controls allows us to provide additional ways to solve your production problems.

Hill Engineering HX Series Custom Hydraulic Presses

Hill Engineering HX Series Custom Hydraulic Presses

Jul 3, 2020 | ,

Hydraulic Flying Die systems, designed and manufactured by Hill Engineering, provide exceptional accuracy and offer you greater flexibility for system design. We manufacture both “Unitized” self-contained die/press hydraulic units, as well as flying hydraulic presses. Our ability to design and build roll forming die systems using the latest high speed hydraulic technology and electronic controls allows us to provide additional ways to solve your production problems.